Embossing entails using specially made dies to make letters stand above the surface. This process results in three-dimensional effect that is very appealing to look at. When the process is carried out using foil embossing dies, the effect is even more appealing literally and visually. This design is used whenever there is need for highlighting important information such as designs, names and logos. Two processes; die embossing and foil embossing are always combined to achieve better results.
This knowledge is usually used in making business cards, invitations, brochures, presentation folders, greeting cards certificates and rack cards. Close to all elements and pictures of design can go through the process of embossing. A more detailed foil and paper made of heavier materials are very effective in bringing out good designs.
The main foils involved in embossing are magnesium, copper scratch and brass embossing foils. The varied types of dies are always used in different environments for varied purposes dictated by certain factors. They are keenly analyzed in the sentences below.
Dies made from magnesium are applied in stamping on flat foils. It is usually made from magnesium metals. Magnesium is a silvery metal that expands very fast upon exposure to small amounts of heat. It is normally acid etched, and is the cheapest of all foils.
Copper foils are also commonly used in this process. Copper being a harder element as contrasted to magnesium expands at a lesser rate in relation to magnesium. This type of foil is always recommended for approximately a hundred impressions. Just like the preceding metal foil, they are etched with acid, and can handle more details as contrasted to magnesium. The price is slightly higher than that of those made from magnesium. This type of die takes about three days to be ready for use.
The other type of die is that used on brass. These are used for embossing both single and multilevel, stamping flat foils, debossing or even a combination of all these processes. This die is made from the strongest alloy of copper. When exposed to heat, it expands the least of all the dies mentioned so far. This particular type is normally hand etched, and is three times as expensive as the magnesium one. The process of coming up with it takes more than five days.
Scratch off die is also commonly used. The surfaces on which they are commonly used are plastic and coated stock. This type comes in varied designs. They are all used for the sole purpose of coming up with different designs. The only effect brought about by the different dies is production of differently colored designs.
Various colors are, hence, produced after using different foils. There are various aspects considered in arriving at the most appropriate die for the embossing process. They include the time they take during their manufacture, the materials used in making them, and their rate in terms of response to heat. They all produce a 3D that looks very beautiful to the eye. One can, therefore, cut on the cost and wastage of resources if he/she buys the most suitable die.
This knowledge is usually used in making business cards, invitations, brochures, presentation folders, greeting cards certificates and rack cards. Close to all elements and pictures of design can go through the process of embossing. A more detailed foil and paper made of heavier materials are very effective in bringing out good designs.
The main foils involved in embossing are magnesium, copper scratch and brass embossing foils. The varied types of dies are always used in different environments for varied purposes dictated by certain factors. They are keenly analyzed in the sentences below.
Dies made from magnesium are applied in stamping on flat foils. It is usually made from magnesium metals. Magnesium is a silvery metal that expands very fast upon exposure to small amounts of heat. It is normally acid etched, and is the cheapest of all foils.
Copper foils are also commonly used in this process. Copper being a harder element as contrasted to magnesium expands at a lesser rate in relation to magnesium. This type of foil is always recommended for approximately a hundred impressions. Just like the preceding metal foil, they are etched with acid, and can handle more details as contrasted to magnesium. The price is slightly higher than that of those made from magnesium. This type of die takes about three days to be ready for use.
The other type of die is that used on brass. These are used for embossing both single and multilevel, stamping flat foils, debossing or even a combination of all these processes. This die is made from the strongest alloy of copper. When exposed to heat, it expands the least of all the dies mentioned so far. This particular type is normally hand etched, and is three times as expensive as the magnesium one. The process of coming up with it takes more than five days.
Scratch off die is also commonly used. The surfaces on which they are commonly used are plastic and coated stock. This type comes in varied designs. They are all used for the sole purpose of coming up with different designs. The only effect brought about by the different dies is production of differently colored designs.
Various colors are, hence, produced after using different foils. There are various aspects considered in arriving at the most appropriate die for the embossing process. They include the time they take during their manufacture, the materials used in making them, and their rate in terms of response to heat. They all produce a 3D that looks very beautiful to the eye. One can, therefore, cut on the cost and wastage of resources if he/she buys the most suitable die.
About the Author:
You can visit www.dynamicengraving.com for more helpful information about Excellent Types Of Foil Embossing Dies.
