Printing for shirts and other materials are relatively easy and it does not take that much effort and expense as well. As long as you know what materials to use and how to use them, of course, you can do this all by yourself instead of going into shops. Although you should know what processes and types there are available, so you can get one that you prefer.
There are a few things you need to get before doing this. A lot of custom screen printing services in Fort Worth TX have certain materials also that they use to generate shirt designs that their customers want from them. Although you can do the same in a small scale if you want to try it out.
The basic process for this silk screen printing is that a photo emulsion is spread on the screens and then with the cutting out of the design, it uses the print outs from a clear paper. This way the design is sort of imprinted on the photo emulsion and makes the holes of the screens. This is where the paint can be spread over it to print on the shirt.
What is needed is a screen frame which can be about fourteen dollars, photo emulsion and sensitizer which goes about to twenty dollars, a two hundred and fifty watts bulb which might be around four dollars, and then a pair of latex gloves. You need to have a room that can be pitch black. This is for the exposure process of the screens.
Additional stuff you need is of course a squeegee for splaying the paint all over the shirt through the screens, and then an article of clothing you want to be printed. The good thing about doing this on your own is personalization. This makes you free to do whatever you want with the design and other customizations you want.
Prepare first the screens and the frame, make sure that it is tightly placed, too. The emulsion should be mixed with the sensitizer and then poured over the screens and evenly spread with a squeegee. Make sure that the size or area that is covered would be enough for the design and to also leave extra room as well.
When that is done, you can then place the screen in a dark room. Make sure there is no leak in light and that it stays there for two hours or until it dries completely. Go inside the room after that without turning on the lights and place over the printed design from the transparent sheet. This is what does the cutting process. Use a masking tape so it is easier to take out later.
Turn on the lamp and let it be exposed to the light for fifteen minutes. See if it already looks good after peeking through the faint cut outs, if not, let it stay for a bit longer. Overexposure can let the image bleed that is why you need to be careful.
Clean it with water and let it dry before placing it over the cloth. Make sure it is aligned well and that the cloth has a cardboard behind it. Pour the ink and spread it with the help of the squeegee and press it well and slide it in various directions to level the layer. Carefully take the screen out and let it dry.
There are a few things you need to get before doing this. A lot of custom screen printing services in Fort Worth TX have certain materials also that they use to generate shirt designs that their customers want from them. Although you can do the same in a small scale if you want to try it out.
The basic process for this silk screen printing is that a photo emulsion is spread on the screens and then with the cutting out of the design, it uses the print outs from a clear paper. This way the design is sort of imprinted on the photo emulsion and makes the holes of the screens. This is where the paint can be spread over it to print on the shirt.
What is needed is a screen frame which can be about fourteen dollars, photo emulsion and sensitizer which goes about to twenty dollars, a two hundred and fifty watts bulb which might be around four dollars, and then a pair of latex gloves. You need to have a room that can be pitch black. This is for the exposure process of the screens.
Additional stuff you need is of course a squeegee for splaying the paint all over the shirt through the screens, and then an article of clothing you want to be printed. The good thing about doing this on your own is personalization. This makes you free to do whatever you want with the design and other customizations you want.
Prepare first the screens and the frame, make sure that it is tightly placed, too. The emulsion should be mixed with the sensitizer and then poured over the screens and evenly spread with a squeegee. Make sure that the size or area that is covered would be enough for the design and to also leave extra room as well.
When that is done, you can then place the screen in a dark room. Make sure there is no leak in light and that it stays there for two hours or until it dries completely. Go inside the room after that without turning on the lights and place over the printed design from the transparent sheet. This is what does the cutting process. Use a masking tape so it is easier to take out later.
Turn on the lamp and let it be exposed to the light for fifteen minutes. See if it already looks good after peeking through the faint cut outs, if not, let it stay for a bit longer. Overexposure can let the image bleed that is why you need to be careful.
Clean it with water and let it dry before placing it over the cloth. Make sure it is aligned well and that the cloth has a cardboard behind it. Pour the ink and spread it with the help of the squeegee and press it well and slide it in various directions to level the layer. Carefully take the screen out and let it dry.
